Power plate POWER PLATE 2025

Pièces détachées Foil Windsurf POWER PLATE

LE NOUVEL ADAPTATEUR POUR FOIL 'POWER PLATE'

Cette base permet d' adapter simplement n'importe un foil avec platine 'standard' 4 vis sur n 'importe quelle planche de windsurf équipée en boitier power box, tuttle box, ou deep tuttel box.
Il suffit de visser la Power plate sous le flotteur, comme on fixe un aileron classique.

Le foil vient se visser sur cette platine par 4 vis.
Des réglages sont possibles pour positionner le foil sur la Power plate:
-vers l'avant=plus de lift, le foil sort plus vite.
-vers l'arriere= moins de lift. bien pour débuter.

Les 4 vis de connection livrés avec la platine Power Plate sont en diamètre M8.

Utilisez un leash pour votre foil, avec Power plate, ou autre systeme de fixation!, cela permet de récuperer votre foil en cas de chocs.
Verifiez la visserie, la longueur des vis, pour que la Power Plate soit suffisamment sérrée dans le boitier d 'aileron.

La power plate est composée de 2 plaques aluminium très solides, et d'un pad pour protéger la carene du flotteur.
The PowerPlate makes it simple to bolt any windsurf board with a Powerbox style fin-box (or Tuttle or Deep Tuttle) to the common 4-Hole plate pattern found on most kite and windsurf foils today.
•Use the included bolts to screw the PowerPlate to the 4-Hole plate on your foil
•Mount to your windsurf board through the fin-box using your current fin-bolt(s).
•Fore & Aft fine tuning can be done with the multiple mounting hole system. Forward = quicker lift, Backward = slower lift
•The PowerPlate is made from 2 pieces of solid aluminum and includes an attached 3/16" foam padding for your board bottom.

Product Details


The PowerPlate makes it simple to bolt any windsurf board with a Powerbox style fin-box (or Tuttle or Deep Tuttle) to the common 4-Hole plate pattern found on most kite and windsurf foils today.
•Use the included bolts to screw the PowerPlate to the 4-Hole plate on your foil
•Mount to your windsurf board through the fin-box using your current fin-bolt(s).
•Fore & Aft fine tuning can be done with the multiple mounting hole system. Forward = quicker lift, Backward = slower lift
•The PowerPlate is made from 2 pieces of solid aluminum and includes an attached 3/16" foam padding for your board bottom.

User Instructions:
1.Be sure to use a Metric 6mm fin-bolt.
2.Be cautious not to cross-thread the fin-bolt
3.Be sure to get a least 12 complete turns into the PowerPlate. (Max # of turns is 16 or 3/4"). You may need a longer screw.
4.Be certain to tighten the fin bolt hard enough to compress the foam. Check & tighten as needed.
5.If your board has a big V-bottom, add extra foam to outer plate edges to add lateral stiffness.
6.Use a leash regardless of your foil/fin-box setup. Impact with a log or other could cause your foil to sink.
7.Adjust the head or plate mounting bolts to your preferred fore/aft position.

Wing Forward=More lift

Wing Rearward=Less lift (better learning)

NOTES:

The PowerPlate has a 12 month warranty against manufacturers' defects. This does not include damage from impact or loss/damage to your foil or board regardless of impact of not.

Aile avant	Aile arriere	Fuselage	Mat	Boitier
n.c	n.c	n.c	n.c	Autres